schildknecht DATAEAGLE X-TREME 3 Series, Руководство по установке и пусконаладке

Страница: 96 / 110

Installation and commissioning DATAEAGLE 3XXX X-treme
Chapter 7
– Diagnostic slave
Please observe: The DE3xxx-A Master recognizes only after a transition time that
a device cannot be accessed anymore. During the transition period sporadic wait
times may occur. Afterwards the DE3xxx-A Master checks approx. every 25 sec-
onds whether the device can be accessed again.
Controlling by PLC is the more extensive procedure but the response time is more
constant.
Block 9: Transmission retries on the radio link
Position Meaning Value Control Value
Byte 0 Dummy 0
Display page (here
9
)
Byte 1 Radio retry
of slave1 0 to 255 0: no function
1: reset counter
Byte 2 Radio retry
of slave2 0 to 255
..
Byte 30 Radio retry
of slave30 0 to 255
Byte 31 9 Feedback from display side
(here 9)
Block 10: Display of the maximum timeout radio slaves
Position Meaning Value Control Value
Byte 0 Dummy 0
Display page (here
10
)
Byte 1 Max. Timeout
Radio slave 1 0 to 255 [sec] 0: no function
1: reset counter
Byte 2 Max. Timeout Ra-
dio slave 2 0 to 255 [sec] 0: no function
1: save the longest timeout
value
..
Byte 30 Max. Timeout Ra-
dio slave 30 0 to 255 [sec]
Byte 31 10
Feedback from display
side
(here
10)
Block 255: Reset all counters for all pages
Position Meaning Value Control Value
Byte 0 Dummy Not specified
Display page (here
255
)
Byte 1 Dummy Not specified
Byte 2 Dummy Not specified
..
..
Byte 31 255 Feedback from display
side