The following is required by the roughly 9,542
government agencies and regulations we have to
comply with. If you have some common sense, they
should seem pretty straightforward. In any case, read these
instructions before proceeding farther, follow all instructions,
and heed all warnings. Or else!
1. If you don’t know how to install audio devices, get a
qualified professional to help.
2. Never use this device near water, and clean only with a
dry cloth.
3. Assure adequate ventilation, do not block any ventilation
openings, or place near heat sources.
4. Use only the supplied power cord or suitable replacement.
Route cords away from traffic areas and protect them from
being pinched. Unplug the cord from the outlet if the apparatus
is unused for a long period of time.
5. To prevent electric shock, do not use the plug with an
extension cord, receptacle, or outlet unless blades can be
fully inserted.
6. Refer all servicing to qualified service personnel. Service is
required when the device has been damaged, including cord or
plug damage, liquid has been spilled or objects have fallen into
the device, the device has been exposed to rain or moisture,
does not operate normally, or has been dropped.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO
RAIN OR MOISTURE.
Saga+ is a no-compromise, ultra-high-end
preamp cleverly disguised with a low price. You
won’t find any volume-control chips or other
shortcuts in Saga—just uber-quality techniques
as used in the most expensive audio gear. That’s
why it has a relay-switched stepped attenuator
volume control that can be run fully passively—or
connected to a unique hybrid 6SN7 tube buffer.
INTRODUCTION
WHAT’S IN THE BOX
(1) Saga+
(1) Power cord
(1) 6N8S or 6SN7 tube
(0) Stick-on feet (they’re pressed in!)
