Magnetic Drilling Machine
Operating Manual
ONLY USE SPIRAL TAP FOR TAPPING OPERATIONS
2. Place the machine at the position to be tapped , place tapping cutter adaptor
in the hole cutter arbor.
Warning: Always stop the machine when changing gear.
3. Bring speed lever to the lowest position.
SHOW PICTURE
TAPPING IS ONLY RECOMMENDED FOR THROUGH HOLES.
Various tapping adaptors are used for thread cutting with your magnetic drilling
machine SWC 50 WT
5.4 THREAD CUTTING
These adapters will allow you to attach tap on the hole cutter arbor. Attach
desired tap to the adaptor.
1. Drill a hole using suitable drill or core drill.
4. Adjust speed with the help of speed controller
5. Shift tapping button to the right
SWC 50 WT
13
0
L
R
