For easy flow control
removal, 1-1/2" PVC SCH. 40
pipe may be cut to length
and attached to top of
flow control cartridge
using PVC primer/cement.
Read all instructions
before installation
Install in conformance
with all local codes
2
Special Precautions
Do not add any form of
lubricant to riser tube
during installation.
4
INSTALLATION
DO NOT AIR TEST UNIT OR
RISER SYSTEM!
Doing so may result in
property damage, personal
injury or death.
1
Tools You Will Need
Flat Head
Screwdriver
Tape
Measure
Reciprocating Saw,
Circular Saw or Jigsaw
INCLUDED WITH FCR1
Grease
Pencil
Page 5 of 6
FCR1 Installation Guide
1
Determine number of risers needed
2
OPTIONAL: Install Flow Control Extension Handle
1b
1 Riser
2 Risers
1a
For the interceptor to
be safely and properly
maintained, dimension
A cannot exceed 25"
(or two FCR1 risers stacked).
Finished Grade
A
12" Max
25" Max
Max Water Level
Risers are not designed
to retain water
3
2 Risers (25") Max
5
