Schertler Unico, Руководство пользователя

Страница: 8 / 12

3.0. STAT
PAGE7
3.1. STAT IN
(Input)
Unbalanced input for the connection of (6.3mm or 1/4”) jacks, high input impedance and optimal sensitivity for high level
signals such as: audio players, active electric bass, guitars, keyboards, etc. Nominal input impedance is 100 Kohm. All
of Schertler’s STAT, BASIK and MARINE-series models and any type of electrostatic microphone can be used directly in
this input without preamplifier. Through this input, it is also possible to connect all passive piezoelectric sources using
the “Active Driver Cable” (which you will find in our product list) – simply by pressing the 10 V button.
3.2. GAIN
(Trim)
This variable gain preamplifier adjusts the sensitivity level to ensure the best possible processing of the signal through
the channel. It is important that this input level be set and optimised in the best way to achieve the cleanest sound pos-
sible.
3.3. 10V
Phantom power supplies the (6.3mm or 1/4”) Jack connector with 10 Volts for powering electret microphones microphones.
3.4. HIGH - MID - LOW
These controls are devoted to high, mid and low frequency regulation. Offering cut and boost of +/- 15dB, they allow a
wide range of tonal variations to be explored. When the controls are positioned at 12:00 there is no cut or boost of the
selected frequency band.
3.5. WARM
When engaged, this low-pass filter damps higher frequencies to produce a warmer sound when using bridge-mounted pic-
kups such as Schertler STAT-series transducers for violin, cello and doublebass.
3.6. REV
This rotary control sets the level of the spring reverb on the individual channel.
3.7. VOL
(Volume)
This rotary control regulates the channel volume.