background image

MIC CHANNEL: This channel enables the connection of a condenser microphone, by activating the 48V button – or dynamic microphone.

STAT CHANNEL: This channel enables, for example, the connection of a guitar equipped with a BLUESTiCK® series system. 

DYN CHANNEL: This channel enables, for example, the connection of a BASIK electrostatic microphone to amplify just any acoustic instrument.

INSERT: For easier volume control, you can use the “UNICO VOLUME CONTROL PEDAL” via the INSERT function.

AUX SEND: For increased volume or wider coverage o, connect an active (powered) extension speaker such as the SCHERTLER SIDE

(180W) or PUB 280 (280 W) active loudspeaker and adjust output volume using the AUX SEND potentiometer. Alternatively, if you

wish to record your music, connect your recorder to the same output and start recording.

DI OUT: Signal can be sent to another mixer, for example SCHERTLER’s OPERA mixer.

LINE OUT: For use with bass or keyboards or to increse overall bass response, SCHERTLER® strongly recommends the use of a sub-

woofer such as the SCHERTLER® BASS200 or PUB380. Connect the LINE OUT to the INPUT of the sub-woofer, press the LOW CUT on

the UNICO, for a three-way (triamplified) system. 

CONNECTING YOUR BLUESTICK

All BLUESTiCK® models (except for MARINE series) can be connected to STAT and DYN inputs with the 10V switch OFF. 

BLUESTiCK® MARINE: Connect to STAT input with the 10V switch ON.

CONNECTING HIGH-IMPEDANCE SIGNALS (piezos, magnetic pick-ups and similar sources)

To connect any passive piezo transducer or magnetic pick-up, use “Active Driver Cable” and connect to the STAT input with

the 10V switch ON. The high-impedance cable is also used to connect electric guitars and bass guitars with magnetic pick-ups.

Product order code: CA-ADRIVER-4

1.

2.

3.

4.

5.

6.

7.

1. c

ond

ens

er

mic

2. G

uitar

with

the

Blue

stick

3.

B

A

SI

K

el

le

ct

ro

st

at

ic

m

ic

.

4. Volume

pedal - UN

I-PED

5.

Sup

por

to

mo

nit

or

SID

E (

180

W)

6.

Ope

ra

mix

er

or

oth

er

boa

rds

7.

Act

ive

bas

s

ext

ens

ion

(BA

SS

200

/P

UB

380

)

UN

ICO

UTILITIES

PAGE3

EXAMPLE 1

Содержание Unico













Отзывы: