Schertler RESOCOIL, Руководство пользователя

Страница: 5 / 12

5
1. Take one string and
make a knot at the end (or
use the little ball if present
on the string). Thread the
string through one of the
holes in the aluminum part
and pull it.
2. Thread the string
through the XLR hole, then
through one of the screw
holes.
3. Put the aluminum part
inside the instrument
through the XLR hole.
Hold the string with one
hand.
4. Thread the string in your
hand through the screw
hole of the XLR connector.
Slip the transducer inside
the instrument and fit the
connector into the hole.
5. Pull the string towards
you and put the metric
screw into the free hole.
Fix the screw with your
screwdriver.
6. Push the string into the
instrument and remove it.
Fix the second screw.
XLR on the side