Schertler RESOCOIL, Руководство пользователя

Страница: 4 / 12

ELECTRODYNAMIC PICKUPS
INSTALLATION
RESOCOIL XLR
1. Remove the strings
2. Choose whether you want to install the
XLR connector on the side (Fig. 1 - step
3.1) or on the tailblock (Fig. 2 - step 4.1)
3.1 Drill a 20 mm hole in the guitar side
for the XLR connector
3.2 Follow the XLR connector instructions
(page 5)
4.1 Drill a 20 mm hole in the guitar
tailblock for the XLR connector
4.2 Install the XLR connector and fix it with
wood screws
5. Follow the “Fitting the Microphone”
instructions
6. Replace the string set
RESOCOIL JACK
1. Remove the strings
2. Choose whether you want to install
the 1/4” jack connector on the side
(Fig. 1) or on the tailblock (Fig. 2)
3. Drill a 12 mm hole in the guitar side
for the jack connector
4. Install the jack connector by tightening
the inside and outside nuts
5. Follow the “Fitting the Microphone”
instructions
6. Replace the string set
Fig. 1:
Installation
on the side
Fig. 2:
Installation on
the tailblock