2.1
2.3
2.2
2. MASTER
2.1. DIRECT OUT
General output. XLR balanced type connector for connections of external systems. The output volume
depends on the regulation of the MASTER-VOL.
2.2. REC OUT L/R
This unbalanced RCA plugs enable the connection of external systems such as recorders. The output
volume can be regulated with the REC OUT control and does not depend on the regulation of the MASTER-
VOL.
2.3. PHANTOM
The amplifier’s XLR inputs provide Phantom power for use with a condenser microphone. Most condenser
(and dynamic) microphones, along with some preamps, can be safely phantom powered. In certain cases
however, phantom power can cause damage to a device.
This tends to occur with unbalanced microphones, preamps or stompboxes that have been modified for
balanced XLR use.
If in doubt, please contact us to check the compatibility of your audio device before using the amplifier.
The LED indicates when the Phantom Power is ON
2.4. REC OUT
This rotary control sets the level of the REC OUT output.
2.5. POWER
This LED indicates when the amplifier is switched ON.
2.6. FX RET
This rotary control sets the master level of the internal reverb on the Master output.
2.7. MASTER
This rotary control sets the level of the Master output.
2.4
2.5
2.6
2.7
