Schertler Arthur Prime 13, Руководство пользователя

Страница: 9 / 12

PRODUCT OVERVIEW - MASTER SECTION
1.
3.
6.
7. REVERB TO AUX 2: This sends reverb out, for
example, to a stage monitor if musicians want to include
reverb in their monitor mix (see Aux Outs below).
AUX OUTS – USING EXTERNAL EFFECTS AND
MONITORS
External effects units and monitors can be connected
to the Master section’s two Aux Outs (balanced jack
sockets).
2. AUX 1 OUT: Taking the signals sent from the various
input channels, this is postfade and more suitable for
connecting external effects. Note: Turning the AUX 1
to REV knob (6) to zero cuts the signal to the internal
reverb making just the external signal audible.
4. AUX 2 OUT: This is prefade and therefore more
suitable for connecting a stage monitor.
3. AUX 1 VOL and 5. AUX 2 VOL: These knobs control
the amount of signal sent from each of the above
outputs respectively.
1. MAIN LEFT/MAIN RIGHT: The main “stereo mix”
can be sent to a PA system, a recorder or other device
via these XLR outputs.
2. 4.
5.
7.
8.
9.
10.
11.
12. 13.
14. 15.