Schertler ARTHUR ART48-MASTER, Руководство пользователя

Страница: 3 / 12

IMPORTANT SAFETY INFORMATION
Do not operate your mixer in excessively humid conditions. Avoid excessive heat from sunshine,
fire or similar. If your mixer is being used in a dusty environment, make sure it is adequately
protected.
Avoid installing your mixer near any heat sources such as radiators, heat registers, stoves, or
other heat-producing apparatus (including amplifiers).
Do not put any sources of open flame (e.g. candles or pyrotechnics) on or near your mixer.
Do not cover your mixer during use, or obstruct the ventilation flow in any way.
Unplug your mixer during lightning storms, or if it is not going to be used for a while. (Remove
the plug from the mains socket to completely disconnect the mixer.)
Your mixer does not contain any “user serviceable” parts. Servicing and/or repairs should only
be carried out by qualified personnel. See MAINTENANCE AND REPAIR (below).
OPERATIONAL SAFETY
During installation or live performances, make sure that your mixer’s power supply cable cannot
be walked on, tripped over or “pinched” – particularly at sockets, around waste bins etc. Also
make sure that the power supply cable is not “stressed” at its point of connection to the mixer.
To avoid interference, do not install your mixer near power transformers, TV sets, RF transmitters,
electric motors, or any other sources of electrical energy.
To avoid potential accidents, only use attachments, accessories and other equipment such as
carts, stands, tripods, brackets or cases that are specified or recommended by the manufacturer,
or sold with your mixer.
Loud volume levels can cause irreparable damage to hearing, so avoid the following while using
your mixer:
- acoustic feedback (never point microphones directly at a loudspeaker)
- high levels of distortion
- impulse noises (loud “pops”) that can occur when a device is switched on/off, connected to or
disconnected from a system.
MAINTENANCE AND REPAIR
Your mixer can be carefully cleaned, as necessary, using a dry cloth. No water must be used.
When cleaning, do not use any solvents (such as acetone or alcohol). These could damage the
mixer’s finish and its labeling.
Visually check your mixer on a regular basis for any signs of wear and tear or damage, but do
not attempt any kind of servicing or repair.
If your mixer malfunctions, or has been damaged, e.g. if the power supply/cable or plug is
damaged, liquid has been spilled or objects have fallen inside, the mixer has been exposed
to rain or moisture, does not operate normally, or has been dropped, please call your nearest
Schertler technical assistance centre. (For more information, contact us at the address on the last
page of this manual.)