www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB
| 11
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
•
Improper handling,
•
Non-compliance of the operating instructions,
•
Repairs by third parties, not by authorized service
technicians,
•
Installation and replacement of non-original spare
parts,
•
Application other than specified.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, profes-
sionally and economically, how to avoid danger, cost-
ly repairs, reduce downtimes and how to increase
reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information.
The machine can only be operated by persons who
were instructed concerning the operation of the ma-
chine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
In addition to the safety notes contained in the pre-
sent operating instructions and the special regula-
tions of your country, the generally recognized techni-
cal rules for the operation of woodworking machines
must be observed.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
2.
Device description (Fig. A - C)
1. Gauge
2. Tyre inflator gauge
3. Deflator valve
4. Plug-in nipple
5. Hose with valve connector, straight
6.
Trigger
7. Blow gun
8.
Extension nozzle
Accessory:
9. Cap for (14), (15), (16)
10. Ball needle
11. Universal adapter
12. Universal adapter
13. Valve adapter, e.g. for cycle tyre valves
14. Universal adapter
15. Adapter for screw valves, e.g. on inflatable din-
ghies
16. Adapter for deflator valves
17. spiral hose (10 m)
3.
Scope of delivery
•
1 Tyre inflator gauge
•
1 Blow gun
• 2 Extension nozzles
•
2 Hoses
•
1 Adapter set (8-piece)
•
1 Operating instructions
•
Open the packaging and remove the device care-
fully.
•
Remove the packaging material as well as the
packaging and transport bracing (if available).
•
Check that the delivery is complete.
•
Check the device and accessory parts for trans-
port damage. When complaints the dealer must be
informed immediately. Subsequent complaints will
not be accepted.
•
If possible, store the packaging until the warranty
period has expired.
•
Read the operating instructions to make yourself
familiar with the device prior to using it.
•
Only use original parts for accessories as well as
for wearing and spare parts. Spare parts are avail-
able from your specialized dealer.
•
Specify our part numbers as well as the type and
year of construction of the device in your orders.