www.scheppach.com
64 | IT
• Controllare che tutti i componenti dello strumento
siano applicati in modo sicuro.
• Controllare che tutti i dispositivi di sicurezza siano
in condizioni adeguate.
m
Pericolo di lesioni!
Rimuovere sempre prima di iniziare i lavori tutti gli
oggetti presenti sul terreno, che potrebbero essere
proiettati all'esterno durante il funzionamento della
falciatrice a motore.
Avvio Fig. 21 - 27 + 41
Leva starter
•
Motore caldo / Starter chiuso:
•
Motore freddo / Starter aperto:
Non appena si è montato lo strumento correttamen
-
te, avviare il motore come segue:
1.
Posizionare lo strumento su una superficie piana
e dura.
2. Portare l'interruttore del motore in posizione ON.
Fig. 22
3.
Aprire la leva starter (10). Fig. 23
4. Premere la pompa della benzina più di 5 volte.
Fig. 24
5. Tirare la maniglia del comando a fune del motori-
no di avviamento (11) per l'avvio del motore da 3
a 5 volte. Fig. 25
6.
Tirare la fune fino a quando il motore non si av
-
via. Fig. 25
7. Attendere brevemente e chiudere dunque la leva
starter (10). Fig. 26
8. Se il motore funziona a vuoto, premere per prima
cosa la leva di rilascio (7) e premere poi la leva
dell'acceleratore (8). Lo strumento è in funzione.
Se si vuole arrestare la leva dell'acceleratore a
velocità media, premere il pulsante di arresto (9).
Fig. 27
9.
Adattare la lunghezza del filo al lavoro:
Questo strumento dispone di una testina di taglio
che funziona secondo il principio "Impulsi e avan-
ti". Si possono rilasciare più fili, procedendo ad
impulsi con la testina di taglio contro l'obiettivo
mentre il motore funziona alla massima velocità:
Il filo in nylon viene rilasciato automaticamente e
la lama taglia la lunghezza in eccesso. Fig. 41
10. Se si presentano problemi, spegnere il motore; lo
strumento smette di funzionare. Se si vuole arre-
stare la testina di taglio, rilasciare la leva dell'ac-
celeratore (8). Fig. 27
11. Se si presenta un problema, tirare il perno della
cintura di sicurezza e staccare subito la falciatri-
ce a motore. Arresto del motore Fig. 22
12. Con motore caldo, la leva dell'acceleratore può
essere impostata direttamente in posizione ON al
riavvio della macchina.
Avvertenza:
Se il motore non si avvia nemmeno do-
po molteplici tentativi, leggere la sezione "Eliminazio-
ne dei problemi al motore".
Avvertenza:
Estrarre il comando a fune di avvio
sempre in modo diritto. Se lo si estrae formando un
angolo, si genera dell'attrito sull'occhiello. A seguito
di tale attrito, la corda si consuma e si usura più ra-
pidamente. Tenere sempre la maniglia del dispositivo
di accensione quando si reinserisce la corda.
Non lasciare mai che la corda scatti all'indietro dopo
che è stata estratta.
Avvertenza:
Non avviare il motore nell'erba alta.
m
Attenzione:
Dopo che il motore è stato spento, il
dispositivo di taglio continua a funzionare ancora per
alcuni secondi; tenere pertanto a distanza il dispositi-
vo di taglio fino a quando questo non si sia arrestato
completamente!
9. Istruzioni di lavoro
Prolunga del filo di taglio
Avviso!
Non utilizzare fili metallici o cavi rivestiti in
plastica di qualsiasi tipo nella bobina di fili. Questo
può determinare gravi lesioni per l'operatore.
Per la prolunga del filo di taglio, lasciare funzionare
il motore a tutto gas e fare procedere ad impulsi la
bobina di fili sul terreno. Il filo si allunga automatica
-
mente. Fig. 41
La lama sullo scudo di protezione accorcia il filo alla
lunghezza ammessa. Fig. 16
m
Cautela:
Rimuovere regolarmente tutti i resti di
erba ed erbacce per evitare un surriscaldamento del
tubo del manico. I resti di erba, erbetta ed erbacce
si impigliano sotto allo scudo di protezione; questo
impedisce un raffreddamento sufficiente del tubo del
manico. Rimuovere i resti con attenzione usando un
cacciavite o strumento simile. Fig. 42
Altri procedimenti di taglio
Se lo strumento è montato correttamente, può taglia
-
re erbacce ed erba alta in punti difficilmente accessi
-
bili, come ad es. lungo recinzioni, muri e fondamenta,
nonché attorno agli alberi. Si può impiegare anche
per "lavori di falciatura", per rimuovere piante selvati-
che al fine di preparare un giardino o per liberare dai
rami inutili una certa area vicino al terreno. Fig. 43
Содержание 5910705903
