Scheppach 5910002917 Скачать руководство пользователя страница 24

Страница: 24 / 48

www.scheppach.com

24 | GB

• Do not operate this product if there is anyone in the

pool.

• This product may only be used in connection with

a degradable pool. Do not use it for built-in pools.
A storable pool can be completely dismantled and
stored over winter and then set up again in the sum-
mer.

• In order to prevent the risk of an accident, never en-

ter the pool if the suction device is loose, broken,
kinked, cracked, damaged or missing. Replace the
loose, broken, kinked, cracked, damaged or missing
suction devices immediately.

• Never play or swim in the vicinity of the suction

device. Your body or hair could be sucked in and
this could cause permanent injuries or cause you to
drown.

• In order the prevent damage to the system and the

risk of injury, always switch the pump off before
changing the position of the filter valve.

• Never operate this product above the maximum

working pressure which is specified on the filter con

tainer.

• Dangerous pressure. An unauthorised or improper

attachment of the filter container cover can cause

the cover to shoot up due to the pressure which can
cause serious injury, property damage or death.

• This product may only be used for the purpose de-

scribed in the operating manual.

Electrical safety instructions

• When operating the product, the power plug must be

freely accessible after installation.

•

Before you put your new pool filter system into opera

tion, have it professionally checked:

Earthing, connection of the neutral line and resid-
ual current circuit breaker must comply with the
safety regulations of the power supply companies
and function properly,

Protect the electrical plug connections from mois-
ture.

If there is a risk of flooding, fit the plug connections
in the flood-proof area.

• Ensure that the mains voltage corresponds to the

specifications on the type plate.

• Carry out the electrical installation in accordance with

the national regulations.

• Only connect the product to a socket with a residu-

al current circuit breaker (FI switch) with a rated re-
sidual triggering current of up to 30 mA; Fuse at least
6 amps.

• Before each use, always check the product, cable

and plug for damages. Defective cables must not be
repaired but replaced with a new ones.
Have product damages repaired by a specialist.

• If the connection cable for the product is damaged

then it must be replaced by the manufacturer or their
customer services personnel or by a similarly quali-

fied person, in order to avoid hazards.

•  Do not use the cable to pull the plug out of the outlet.
•  Protect the cable from heat, oil and sharp edges.
•  Do not carry or attach the product by the cable.
•  Use only extension cables that are splash-proof and

intended for outdoor use. Always unroll a cable drum
completely before use. Check the cable for damage.

• Pull out the mains plug before all work on the prod-

uct, in work breaks and when not in use.

• Mains connection cables shall not have a smaller

cross-section than rubber hose lines with the desig-
nation H05RN-F 3*0.75mm². The cable length must
be 10 m. The conductor core cross-section of the ex-
tension cable must be at least 1.5 mm2.

Warning!

This power tool generates an electromag-

netic field during operation.

This field can impair active

or passive medical implants under certain conditions.
In order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the power tool.

6. Residual risks

The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Health hazard due to electrical power, with the use

of improper electrical connection cables.

• Furthermore, despite all precautions having been

met, some non-obvious residual risks may still re-
main.

• Residual risks can be minimised if the “Safety infor-

mation” and the “Proper use” together with the oper-
ating manual as a whole are observed.

• Avoid accidental starting of the machine: the op-

erating button may not be pressed when inserting
the plug in an outlet. Use the tool attachment that
is recommended in this operating manual. This is
how to ensure that your machine provides optimum
performance.