Technical Data
Motor power supply:
........................................................................................................................................................................................12 V d.c.
Idling speed: .....................................................................................................................................................................................
5000-16000 min-1
Oscillation angle: .........................................................................................................................................................................................................3°
Rated voltage for rechargeable battery:
......................................................................................................................................................10.8 V d.c.
Charge current for rechargeable battery:
..............................................................................................................................................................3.4 A
Battery charger supply voltage:
.................................................................................................................................................................230V~ 50Hz
Weight: ................................................................................................................................................................................................................ 0.9 kg
Technical modifications reserved!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
LpA sound pressure level 78.5 dB(A)
KpAuncertainty 3 dB
LWA sound power level 89.5 dB(A)
KWAuncertainty 3 dB
Wear ear-muffs.
The impact of noise can cause damage to
hearing.
Total vibration values (vector sum of three
directions) determined in accordance with EN
60745.
Handle
Vibration emission value ah = 2.97 m/s²
Uncertainty K = 1.5 m/s2
Additional information for electric power
tools
Warning!
The specified vibration value was established
in accordance with a standardized testing
method. It may change according to how the
electric equipment is used and may exceed the
specified value in exceptional circumstances.
The specified vibration value can be used to
compare the equipment with other electric
power tools.
The specified vibration value can be used for
initial assessment of a harmful effect.
Keep the noise emissions and vibrations to
a minimum.
•
Only use appliances which are in perfect
working order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the
appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever
necessary.
•
Switch the appliance off when it is not in
use.
•
Wear protective gloves
Explanation of symbols
Wear ear protection.
Wear a dust mask.
Wear eye protection.
m
The parts and sections of
these operating instructions
concerning your safety are
marked with this symbol.
Please read the operating
instructions before using
this electric tool.
General information
•
After unpacking, check all parts for
possible transportation damages. In the
event of complaints, inform the supplier
immediately. Any complaints made after
this time will not be accepted.
•
The shipment is to be checked for com
-
pleteness upon receipt.
•
Read through the manual carefully in
order to make yourself familiar in dealing
with the device before using it for the first
time.
•
Only use original equipment regarding
accessories, as well as consumable
items and spare parts. Spare parts can
be obtained from your specialized dealer.
When ordering, please specify our part
numbers, as well as type and construc
-
tion year of the device.
NOTE:
According to the applicable product liability
laws, the manufacturer of the device does not
assume liability for damages to the product or
damages caused by the product that occurs
due to:
•
Improper handling,
•
Non-compliance of the operating instruc
-
tions,
•
Repairs by third parties, not by autho
-
rized service technicians,
•
Installation and replacement of non-
original spare parts,
•
Application other than specified,
•
A breakdown of the electrical system that
occurs due to the non-compliance of the
electric regulations and VDE regulations
0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the
operating instructions before installing and
commissioning the device. The operating
instructions are intended to help the user to
become familiar with the machine and take
advantage of its application possibilities in
accordance with the recommendations. The
operating instructions contain important infor
-
mation on how to operate the machine safely,
professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and
how to increase reliability and service life of
the machine.
In addition to the safety regulations in the
operating instructions, you have to meet the
applicable regulations that apply for the ope
-
ration of the machine in your country. Keep
the operating instructions package with the
machine at all times and store it in a plastic
cover to protect it from dirt and moisture.
Read the instruction manual each time before
operating the machine and carefully follow
its information. The machine can only be
operated by persons who were instructed
concerning the operation of the machine
and who are informed about the associated
dangers. The minimum age requirement must
be complied with.
We have marked the points in this manual
that concern your safety with this sign:
m
GB
10
Содержание 5909204900
Страница 2: ...2 ...
Страница 3: ...Fig 1 1 2 3 5 4 3 ...
