www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
18 | GB
f) Ensure that no liquid splashes against the
housing of the power tool.
Liquid that has pen-
etrated the power tool can cause damage and
lead to electric shock.
g)
Follow the instructions and warnings for the
material to be mixed.
Material to be mixed may
be harmful.
h) If the power tool falls into the material to be
mixed, unplug the power tool immediately
and have the power tool checked by a quali-
fied repair person.
Reaching into the mixing
container with the power tool still plugged in can
lead to electric shock.
i)
Do not reach into the mixing container with
your hands or insert any other objects into it
while mixing.
Contact with the stirrer may lead to
serious personal injury.
j)
Start up and run down the power tool in the
mixing container only.
The stirrer may bend or
spin in an uncontrolled manner.
Residual risks
m
The machine has been built according to the
stateoftheart and the recognised technical safety
requirements. However, individual residual risks can
arise during operation.
•
Danger of injury for fingers and hands due to the
rotating mixing paddle.
• Hazard due to electrical power with the use of im-
proper electrical connection cables.
•
Furthermore, despite all precautions having been
met, some nonobvious residual risks may still re
-
main.
•
Residual risks can be minimised if the „Safety in
-
structions“ and „Intended use“ are observed along
with the complete operating instructions.
6.
Assembly (fig. 2-4)
1) Thread the mixing paddle (1) clockwise into the
mixing element (2). (fig. 2)
2) Drive the assembled mixing paddle onto the drive
shaft (3). (fig. 3)
DANGER!
Use only a mixing paddle that is designed and
suitable for the material to be mixed. A wrong
mixing paddle may put strain on the power tool
which may damage the tool and lead to acci-
dents!
Remove the mixing paddle from the drive shaft by
turning it counterclockwise. The paddle may sit quite
tight in its holding fixture. If this is the case, the fix
-
ture must be secured with a key against turning with
the paddle. (fig. 4)
d)
Store idle power tools out of the reach of chil
-
dren and do not allow persons unfamiliar with
the power tool or these instructions to oper
-
ate the power tool.
Power tools are dangerous in
the hands of untrained users.
e)
Maintain power tools and accessories.
Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If
damaged, have the power tool repaired before
use.
Many accidents are caused by poorly main
-
tained power tools.
f)
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the power
tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpect-
ed situations.
5.
Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts.
This will ensure that the safety of the
power tool is maintained.
m
ATTENTION!
This power tool generates an electromagnetic field
during operation.
This field can impair active or pas
-
sive medical implants under certain conditions. In or-
der to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the machine.
Mixer safety instructions
a) Always hold the power tool with both hands
on the intended handles.
Loss of control can
cause personal injury.
b) Ensure sufficient ventilation when mixing
flammable materials to avoid a hazardous at-
mosphere.
Developing vapour may be inhaled or
be ignited by the sparks the power tool produces.
c)
Do not mix food.
Power tools and their accesso-
ries are not designed for processing food.
d) Keep the cord away from the working area.
The cord may be entangled by the stirrer.
e)
Ensure that the mixing container is placed in
a firm and secure position.
A container that is
not properly secured may move unexpectedly.
Содержание 5907805901
Страница 2: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 2 1 1 2 3 4 5 6 7 9 8 4 ...
Страница 3: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 3 4 2 2 1 3 1 3 ...
Страница 108: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 108 ...
Страница 110: ... www scheppach com service scheppach com 49 08223 4002 99 49 08223 4002 58 110 ...
