www.scheppach.com
GB | 27
3. Place the attachment ring (10a) on the bottle cap
(9a). Now attach the squeegee attachment (10) to
the spray head (7). Make sure that the hooks on
the squeegee attachment (10) line up with the slots
in the fastening ring (10a). Connect by pushing the
squeegee attachment (10) all the way in until you
hear a click.
4. Place the assembled parts on the spray bottle (9)
and turn clockwise.
5.
Loosen the Velcro fastener (6a) of the microfibre
cloth (6). Slide the right side of the squeegee at-
tachment (10) into the right fastening tab (6b). Pull
up the left fastening tab (6c) and slide it onto the
left side of the squeegee attachment (10).
6. Then fasten the squeegee attachment (10) again
with the Velcro fastener (6a).
9.2 Fitting the suction attachment (Fig. 4 + 5)
Fasten:
1. Align the suction attachment (1) with the suction
opening (1c) of the product.
2. Insert the suction attachment (1) into the suction
opening (1c) as far as it will go until you hear a
click.
3. Make sure that the attachment lock (1b) is properly
engaged in the slot.
Release: Press the latch on the attachment (1b) and
pull out the suction attachment (1).
9.3 Charging (Fig. 6)
Use the charging unit (11) to charge the rechargeable
battery in the product.
WARNING!
Do not charge the product when liquid is
present in the dirty water tank (2). When delivered, the
charge level of the rechargeable battery will be low.
Charge it fully before using it for the first time.
Only
charge using the charging unit supplied.
1. Open the cover on the charging socket (4). Insert
the charging unit (11) into the charging socket (4a).
Make sure it clicks into place properly.
2. Plug the charging unit plug into a suitable power
source.
3. The charging status is indicated by the status indi-
cator (3) as follows:
• Charging: Flashing blue light.
• Charging ended: Continuous blue light.
Operating time with full
rechargeable battery
30 min
Battery charger
Input voltage
100-240 V~ / 50-60 Hz
Output / charging volt-
age
5 V
Charge current
800 mA
Charge time
3 h
Protection class
II
Technical changes reserved!
8. Unpacking
• Open the packaging and carefully remove the prod-
uct.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
• When ordering please provide our article number as
well as type and year of manufacture for your prod-
uct.
m
WARNING!
The device and the packaging material are not
children’s toys!
Do not let children play with plas
-
tic bags, films or small parts!
There is a danger of
choking or suffocating!
9.
Attachment and operation
9.1 Fitting the spray bottle (Fig. 2 + 3)
1. Unscrew the spray head (7) anti-clockwise and
take it off the spray bottle (9).
2.
Hold the squeegee attachment (10) and pull off
the attachment ring for the squeegee attachment
(10a).
Содержание 5907728901
