Scheppach 5907719901, Оригинальное руководство пользователя

Страница: 23 / 56


www.scheppach.com /

service@scheppach.com /

+(49)-08223-4002-99 /

+(49)-08223-4002-58
GB | 23
13. Possible causes of failure
Troubleshooting Cause Remedy
Device does not work
No electrical voltage at the device.
Check the fuse, power cable and power plug
and have them replaced by qualified personnel
if necessary.
Cross section of the extension
cable not large enough and/or the
extension cable is too long.
Use extension cables with larger cross sec-
tions and/or use shorter extension cables.
The mains voltage is lower than
that specified.
Contact the power supply company if neces-
sary.
The pump is frozen. Check and thaw if necessary.
The motor starts but there is
no build up of pressure
Air intake in the water inlet.
Check the supply hose and hose connection
and replace if necessary.
Discharge nozzle is too large. Check and replace if necessary.
Irregular operating pressure Air intake in the water inlet.
Check the supply hose and hose connection
and replace if necessary.