Scheppach 5906143901, Перевод оригинального руководства пользователя

Страница: 22 / 44

www.scheppach.com
22 | GB
Wear hearing protection.
The effects of noise can cause a loss of hearing.
m
Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
Sound power level L
wA
97 dB(A)
Sound pressure level L
pA
73,7 dB(A)
Uncertainty K
wA/pA
2,37 dB(A)
m
Warning
The vibration emission value can vary from the spec-
ified value during actual use of the electric tool, de -
pending on the way it is used.
Try to keep exposure to vibrations as low as possi-
ble. Measures to reduce exposure to vibration are,
for example, wearing gloves when using the ma-
chine, or by reducing the work time.
All parts of the operating cycle must be considered
for this (for example: times during which the electric
tool is switched off and times when it is turned off but
runs without load).
Reduce noise generation and vibration to a mini-
mum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adapt your working method to the machine.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
7. Before starting the equipment
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty
period has expired.
m
ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!
• Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
• Prior to initial commissioning, remove the transport
plug (11) and fill the crank housing with oil as de -
scribed in 8.6.
• Do not store or eat food and drink in the work area.
Paint vapours are harmful to your health.
• The work area must exceed 30 m³ and suffi cient
ventilation must be ensured during spraying and
drying.
• Do not spray against the wind. Always adhere to
the regulations of the local police authority when
spraying combustible or hazardous materials.
• Do not process media such as white spirit, butyl
alcohol and methylene chloride with the PVC pres-
sure hose. These media will destroy the pressure
hose.
• The work area must be separated from the com-
pressor so that it cannot come into direct contact
with the working medium.
Operating pressure vessels
• You must keep your pressure vessel in good work-
ing order, operate the vessel correctly, monitor the
vessel, carry out necessary maintenance and re-
pair work immediately and meet the relevant safety
precautions.
• The supervisory authority may enforce essential
control measures in individual cases.
• A pressure vessel is not allowed to be used if it has
faults or deficiencies that can endanger workers
or third parties.
• Check the pressure vessel for signs of rust and
damage each time before using. Do not use the
compressor with a damaged or rusty pressure
vessel. If you discover any damage, then please
contact the customer service workshop.
Do not lose these safety instructions.
6. Technical data
Mains connection 230 V~ / 50 Hz
Motor rating 1800 W
Operating mode S1
Compressor speed 2850 min
-1
Pressure vessel capacity 80 l
Operating pressure approx. 10 bar
Theoretical intake capacity approx. 310 l/min
Theoretical delivery rate approx. 180 l/min
Protection type IP20
Weight of the unit 51.6 kg
Max. altitude
(above mean sea level)
1000 m
Pressure ratio 2,23
Noise and vibration
Total vibration values determined in accordance with
EN ISO 3744.