www.scheppach.com
50 | GB
Remaining hazards
Remain attentive at all times when working, and keep third parties at a safe distance from
your work area.
Even if you use this electric power tool in accordance to instructions, certain residual risks
cannot be eliminated. Remaining hazards can be minimized by following the instructions in
„Safety instructions“, „Intended Use“ and in the entire operating manual.
The following hazards may arise in connection with the equipment’s construction and lay-
out:
• The use of incorrect or damaged mains cables can lead to injuries caused by electricity.
• Avoid accidental starts: do not press the start button while inserting the plug into the
socket.
• Damage to hearing if no suitable ear protection is applied.
• Dirt particles, dust etc. can get irritate the eyes or face despite wearing safety goggles.
• Inhaling swirled up particles.
Keep this safety information in a safe place.
6. Technical Data
Mains connection
220 - 240 V~ / 50 Hz
Motor rating
1100 W
Operating mode
S3 25%
Compressor speed
3800 min
-1
Pressure vessel capacity
24 l
Operating pressure
approx. 8 bar
Theoretical intake capacity
approx. 180 l/min
Theoretical delivery rate
approx. 96 l/min
Protection type
IP30
Weight of the unit
ca. 15 kg
Max. altitude
(above mean sea level)
1000 m
The noise emission values were measured in accordance with EN ISO 3744.
