www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB | 35
Always attach the transport guard straight away.
6. Technical data
MT33P
Technical data
Cutting data grass trimmer
Cutting circle diameter of line
430 mm
Cutting line diameter
2 x 2.4 mm
Cutting line length
4 m
Maximum speed grass trimmer
7000
min
1
Cutting data brush cutter
Cutting circle diameter of blade
255 mm
Cutter balde thickness
1.4 mm
Teeth quantity
3
Maximum speed brush cutter
8500
min
1
Cutting data hedge trimmer
Cutting circle diameter
24 mm
Angle adjustment
+90°/0°/75° (165°)
Cutting length
400 mm
Max. cutting speed max.
1550
min
1
Cutting data pole saw
Guide bar length
305 mm
Cutting length
254 mm
Guide bar type
AL1039507P
Chain pitch
3/8"
Saw chain type
3/8.5039
Chain link thickness
1.27 mm
Oil tank capacity
125
cm
3
Power unit
Displacement
32.6
cm
3
Max. engine output
0,9
kW
Idle speed
3000 ±200
min
1
Fuel tank
capacity
0,9 l
Engine type
2stroke engine, air
cooled
Weight grass trimmer
7.2 kg
Weight brush cutter
7.2 kg
Weight pole saw
7.1 kg
Weight hedge trimmer
7.7 kg
Subject to technical changes!
Information concerning noise emission measured ac
cording to relevant standards:
Sound pressure L
pA
= 94 dB(A)
Sound power L
WA
= 114 dB(A)
Uncertainty K
PA
= 3 dB(A)
Wear earmuffs.
The impact of noise can cause damage to hearing.
Grass trimmer: vibration A
hv
= 4,8
m/s
2
Brush cutter:
vibration A
hv
= 4,12
m/s
2
Hedge trimmer: vibration A
hv
= 4,77
m/s
2
Pole saw:
vibration A
hv
= 4,32
m/s
2
Uncertainty K
PA
= 1,5 m/s
2
Reduce noise generation and vibration to a minimum!
•
Use only equipment that is in perfect condition.
•
Maintain and clean the equipment regularly.
•
Adopt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
• Wear gloves.
In these operating instructions we have marked
the places that have to do with your safety with
this sign:
m
7. Before starting the equipment
Each time before use, check the following:
• That there are no leaks in the fuel system.
•
That the equipment is in perfect condition and that
the safety devices and cutting devices are com
plete.
• That all screws are securely fastened.
• That all moving parts move smoothly.
Fuel and oil
Recommended fuels
Use only a mixture of unleaded petrol and special
2stroke engine oil. Mix the fuel mixture as indicated
in the fuel mixing table.
Important:
Do not use a fuel mixture which has
been stored for longer than 90 days.
Important:
Never use 2stroke oil with a recom
mended mixing ratio of 100:1. The manufacturer’s
warranty will be voided in case of engine damage
due to inadequate lubrication.
Important:
Only use containers designed and ap
proved for the purpose to transport and store fuel.
Pour the correct quantities of petrol and 2stroke oil
into the mixing bottle (see scale printed on the bot
tle). Then shake the bottle well.
Never use oil for 4cycle engine or use water cooled
2cycle engine. It can cause spark plug fouling ex
haust part blocking or piston ring sticking.
Mixed fuels, which have been left unused for a pe
riod of one month or more, may clog the carburetor
or result in the engine foiling to operate property. Put
remained fuel into an airtight container and keep it in
the dark and cool room.
Fuel mixing table
Mixing procedure: 40 parts petrol to 1 part oil
Example:
1 l Petrol : 0,025 l 2stroke oil
5 l Petrol : 0,125 l 2stroke oil