Scheppach 5901202901, Перевод с оригинального руководства пользователя

Страница: 20 / 272

20 GB
2. Layout (Fig. 1-21)
1. Handle
2. ON/OFF switch
3.
Release lever
4. Machine head
5. Movable blade guard
6. Saw blade
7.
Clamping device
8. Workpiece support
9. Locking screw for workpiece support
10.
Table insert
11. Handle
12.
Pointer
13. Scale
14. Turntable
15. Fixed saw table
16.
Stop rail
16a. Moveable stop rail
16b. Set screw
17. Sawdust bag
18.
Scale
19. Pointer
20. Locking screw for drag guide
21.
Drag guide
22. Locking screw
23.
Fastening bolt
24. screw for cutting depth limiter
25.
Stop for cutting depth limiter
26. Fastening bolt for turn table
27. Adjustment screw (90°)
28. Adjustment screw (45°)
29.
Flange bolt
30. Outer flange
31. Saw shaft lock
32. Inner flange
33.
Laser
34. ON/OFF switch for laser
35. Battery compartment
36. Battery compartment cover
37.
Guide bar
a) 90° stop angle (not supplied)
b) 45° stop angle (not supplied)
c) spring
d) Allen key, 6 mm
3. Scope of delivery
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the pack -
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty pe -
riod has expired.
1. Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschine GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and
success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
•
Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due
to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the operating instruc -
tions before installing and commissioning the device.
The operating instructions are intended to help the user
to become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations. The operating instructions contain
important information on how to operate the machine
safely, professionally and economically, how to avoid
danger, costly repairs, reduce downtimes and how to in
-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula
-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed concern
-
ing the operation of the machine and who are informed
about the associated dangers. The minimum age re
-
quirement must be complied with.