Scheppach 5806105903, Руководство пользователя

Страница: 40 / 108

40 GB
10.4 Checking the oil level at regular intervals (Fig. 11)
Place the compressor on a level and straight surface.
The oil level must be between the MAX and MIN marks
on the oil level window (12).
Oil change: we recommend SAE 15W 40 or equivalent.
The original oil filling must be changed after 100 hours
in operation; thereafter the oil must be drained and re
-
placed with new oil after every 500 hours in operation.
10.5 Changing the oil (Fig. 1,10,11)
Switch off the engine and pull the mains plug out of the
socket. Remove the oil sealing plug (15). After releasing
any air pressure you can unscrew the oil drain plug (12)
from the compressor pump (13).
To prevent the oil from running out in an uncontrolled
manner, hold a small metal chute under the opening and
collect the oil in a vessel. If the oil does not drain out com
-
pletely, we recommend tilting the compressor slightly.
When the oil has drained out, re-fit the oil drain plug
(12).
Dispose of the old oil at a drop-off point for old oil.
To fill in the correct quantity of oil, make sure that the
compressor stands on an even surface. Fill new oil
through the oil filler opening (19) until it comes up to the
maximum level. This is marked with a red dot on the oil
level window (12) (Fig. 11). Do not exceed the maximum
filling quantity. Overfilling the equipment may result in
damage. Reinsert the oil sealing plug (15) into the oil
filler opening (19).
10.6 Cleaning the intake filter (Fig. 3, 12, 13)
The intake filter prevents dust and dirt being drawn in.
It is essential to clean this filter after at least every 300
hours in service. A clogged intake filter will decrease
the compressor’s performance dramatically. Open the
screw (E) to remove the intake filter(2x).
Then pull off the filter cover (D). Now you can remove
the air filter (F). Carefully tap out the air filter, filter cover
and filter housing.
Then blow out these parts with compressed air (approx.
3 bar) and reinstall in reverse order.
10.7 Storage
m
Important!
Pull out the mains plug and ventilate the equipment and
all connected pneumatic tools. Switch off the compres -
sor and make sure that it is secured in such a way that it
cannot be started up again by any unauthorized person.
m
Important!
Store the compressor only in a dry location which is not
accessible to unauthorized persons. Always store up
-
right, never tilted! Oil may leak out!
10.7.1 Releasing excess pressure
Release the excess pressure by switching off the com -
pressor and using the compressed air which is still left
in the pressure vessel, e.g. with a compressed air tool
running in idle mode or with a blow-out pistol.
Service information
Please note that the following parts of this product are
subject to normal or natural wear and that the following
parts are therefore also required for use as consuma
-
bles.
Wear parts*: belt, coupling
* Not necessarily included in the scope of delivery!
11. Disposal and recycling
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in this
packaging can be reused or recycled The equipment
and its accessories are made of various types of mate
-
rial, such as metal and plastic. Defective components
must be disposed of as special waste. Ask your
dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must not
be disposed of together with domestic waste in
compliance with the Directive (2012/19/EU) per
-
taining to waste electrical and electronic equip -
ment (WEEE). This product must be disposed of at a
designated collection point. This can occur, for exam
-
ple, by handing it in at an authorised collecting point for
the recycling of waste electrical and electronic equip
-
ment. Improper handling of waste equipment may have
negative consequences for the environment and human
health due to potentially hazardous substances that are
often contained in electrical and electronic equipment.
By properly disposing of this product, you are also con
-
tributing to the effective use of natural resources. You
can obtain information on collection points for waste
equipment from your municipal administration, public
waste disposal authority, an authorised body for the
disposal of waste electrical and electronic equipment
or your waste disposal company.
timento di strumenti
elettrici ed elettronici usati o presso il servizio di net -
tezza urbana.