Schenker xirios d301, Руководство по обслуживанию

Страница: 18 / 22

Disassembly
2 - 8 Removing and Installing the Hard Disk Drive
2.Disassembly
Reinserting the HDD
1. To reinsert the HDD assembly hold it carefully at the four corners between your thumb and forefinger and Insert
the HDD directly down into the bay vertically ( Figure 1a ) .
2. Press and slide the HDD assembly at the area illustrated (do not press on the center area - see sidebar) the
direction of arrows to make sure the HDD fits securely into the connector.
3. Press down on the rubber case to ensure the assembly is properly seated before replacing the cover and
screws.
4. Replace the component bay cover ( page 2 - 6 ).).
Figure 4
HDD Installation
a. Insert the HDD di-
rectly down into the
bay vertically.
b. Press and slide the
HDD assembly at the
area illustrated
c. Press down on the
rubber case

Hard Disk Handling
Do not press down on the
center off the hard disk as
this area houses the hard
disk drive motor.
2
6 1
2
3
2
3
3
a. c.
b.
2
1

1. HDD Assembly