Operating and Installation Overvoltage Protection OVP 01 A
2
Issued: 20.12.2011
822.221 BA / EN
1 Operating Instructions
1.1 Introduction
This instruction manual contains important information on the safe operation
of equipment supplied by Schaudt. Make sure you read and follow the safety
instructions provided.
The instruction manual should be kept in the vehicle at all times. Ensure
other users are made aware of safety regulations.
1.2 Safety information
1.2.1 Meaning of safety symbols
Y
DANGER!
Failure to comply with this symbol may result in danger to life and limb.
Y
WARNING!
Failure to comply with this symbol may result in injury to persons.
Y
ATTENTION!
Failure to comply with this symbol may result in damage to the device or
connected consumers.
Y
This symbol indicates recommendations or special features.
1.2.2 General safety information
The device is state-of-the-art and complies with approved safety regulations.
Despite this, persons can be injured and the control and switch panel dama-
ged if the safety instructions contained herein are not followed.
Ensure that the device is in perfect working order before use.
Any technical faults which may impact personal safety or the safety of the
device must be rectified immediately by qualified personnel.
Y
DANGER!
230 V unit carrying mains voltage.
Risk of fatal injury as a result of electric shock or fire:
F
Never undertake maintenance work on the device.
F
Never try to start the device with defective housing or using a defec-
tive mains cable or a faulty connection.
F
Do not contribute fluids into the housing.
Y
DANGER!
Incorrect installation.
Electric shock or damage to connected devices:
F
Install as shown in installation instructions.