Instruction Manual for Electroblock EBL 252
10
Date: 23.01.2020
8110253 BA / EN
Main charge
I
Full charge
Uo
Compensation
charge
U
4 h
Time
U
charge
V
14,3/14,7
13,7
Fig. 5
Example of the charging voltage curve with electroblock EBL 252
I Main charge with maximum 18 A charging current, electronically limited, up to final char-
ging voltage. Start of charge also for totally discharged batteries.
Uo Automatic changeover to full charge with constant 14,3/14,7 V. The duration of the fully
charge phase is 4h for both battery types.
U Automatic changeover to compensation charge with constant 13.7V. In the compensation
charge phase, the voltage at the output of the charging module is constant.
Start of a new charging cycle by switching over to main charge, if the battery voltage falls
below 13.7V for more than 5 seconds when loaded. Start of charge also for totally dischar-
ged batteries. The internal charge module can also be operated without leisure battery.
8 Maintenance
The EBL 252 electroblock requires no maintenance.
Clean the electroblock with a soft, slightly damp cloth and mild detergent. Never use spirit,
thinners or similar substances. Do not allow liquids to enter the electroblock.
No part of this manual may be reproduced, translated or copied without express written per-
mission.
Charging
curve
Cleaning
E
