DT 220 B control and switch panel instruction manual
12
Issued: 30.06.2006
830.588 BA / EN
³
Use the “+” or “--” buttons to set the year.
³
Confirm the entry by pressing “OK”.
³
Press the “Set up” menu button.
F
The day display flashes.
³
Use the “+” or “--” buttons to set the day.
³
Confirm the entry by pressing “OK”.
F
The month display flashes.
³
Use the same procedure to set the month.
³
Press the “Main menu” button when you have completed all of the
entries.
F
The display will remain illuminated.
F
The main menu is now displayed.
5.4.2.2 Set up the installed (nominal) battery capacity for the lei-
sure battery
³
Press the “Battery menu” button.
F
The display will illuminate.
F
The remaining utilisable leisure battery capacity will now be displayed.
³
Press the “Set up” menu button and keep it held down for at least 3 s.
F
The display will change over to battery menu set up mode.
F
The maximum utilisable leisure battery capacity will now be displayed.
The system uses the “installed (nominal) battery capacity” to calculate
this value.
³
Now press the “Set up” menu button once again as long as the display is
lit up.
F
The installed (nominal) leisure battery capacity display will flash.
