English
- 56 -
The IDTV will automatically tune to the UHF or VHF
(
** for EU countries
) transmission channels, searching
for digital terrestrial TV broadcasts and displaying the
names of channels found. This process will take about
a few minutes. To cancel searching, you can press the
“
MENU
” button at any time during the process.
Note: If the digital TV fails to store any channels, “No
channels available.” message will be displayed on
the screen.
After Automatic Search is completed, the following
message will be displayed, asking for sorting option.
If you select “YES”, programme list will be sorted
according to LCN (logical channel number). Select
“NO” for using frequency sort. This screen will be
displayed for both aerial and cable options. (This
feature is available for only Germany,Austria and Italy
country option).
Either you select
AERIAL
or
CABLE
option from the
search type menu, after the digital automatic search is
completed, the following message asking for analogue
channel search appears on the screen:
To search for analogue channels, select “Yes”. TV
switches to the analogue TV mode. A menu will be
displayed to search for analogue channels.
Set
Language
item by pressing “ ” or “ ” button.
Press “ ” or “ ” button to highlight
Country
item and
then use “ ” or “ ” to set. Press “ ” or “ ” button to
highlight
TXT. Language
. Set TXT Language by using
“ ” or “ ” button. To cancel, press the
BLUE
button.
When
fi
nished, press
OK
or
RED
button to continue
and the following OSD will be displayed:
After
automatic tuning
is
fi
nalized, a programme list
will appear on the screen. In the programme list you
will see the programme numbers and names assigned
to the programmes.
If you do not accept the locations and/or the names
of the programmes, you can change them in Program
table. For details, see the section, “Program table”.
General Operation
Press the “
SOURCE
” button and select DTV/USB
from the list. The TV then switches to digital TV mode.
Information Banner
• Whenever you change the channel using the
P +
or
P -
button or numeric buttons, the TV displays
the broadcast picture along with an information
banner at the bottom of the screen. Broadcast type
information is also displayed. This will remain on the
screen for approximately a few seconds.
• The information banner can also be displayed
by pressing the “
INFO
” button at any time while
watching the TV. Pressing “
INFO
” button again
removes the banner.
If the selected channel is locked, you must enter
the correct four digit key to view the channel. In this
case, a dialog box asking for the lock key will be
displayed:
Electronic Programme Guide
Some, but not all, channels send information about
the current and next events. Please note that event
information is updated automatically. If there are no
event information data available for channels,EPG
will be displayed with blanks.
• Press
EPG
button to view the
EPG
menu.
• Press “ ” or “ ” buttons to navigate through
channels.
• Press “ ” or “ ” buttons to navigate through the
programme list.
RED button (Shrink):
makes the info boxes
smaller.
GREEN button (Expand):
makes the info boxes
larger.
YELLOW button (Prev. Day):
displays the
programmes of previous day.
02_MB37D_[GB]_3920UK_IDTV_TC_22743W_BRONZE15_10070360_50177320.indd 56
02_MB37D_[GB]_3920UK_IDTV_TC_22743W_BRONZE15_10070360_50177320.indd 56
15.11.2010 12:34:25
15.11.2010 12:34:25
Содержание 22LE5101
Страница 1: ...22LE5101 ...
Страница 83: ...50177320 ...
