Schaub Lorenz SLK GB6227L, Руководство пользователя, Страница: 29 / 60

Fire is going out or blow ing highly w hen the sw itch is in low er
position.

A strong medium air current may switch off the hob.

The connected injectors and the used gas should be checked
properly.
Flames are blow ing improperly and unevenly.

Make sure that heating zones (burner cap and burners) and
injectors are clean. Make sure of fitting burner cap and burners
properly.
Sw itches are heating during cooking.

Use small cooker on hobs next to control switches. Big cooker
should be put away from the switches. Put the pan to the center of
the hob; pans and pots should not align with the switches.
Y ellow ing is occurring on hob plate.

If there is a section operating electrically in your hob, yellowing may
occur on hob plate after functioning of heater element available in
this section. This situation is not a fault. It does not constitute a
reason for product replacement.
Metal voices are coming w hile the product is heating and cooling.

This is not a fault. When the metal parts get heated, they may
expand and make a sound.
Signal lamp does not operate.

Fuse is blown; power supply may not at your product. Your product
may out of order.
This device, in E urope, accords to the directives 2012/19/EU Waste E lectrical
and E lectronic E quipment. (WE E E ) this device prior to disposing of junk and
trash, the environment and human health against the potential negative
consequences need to block. Otherwise, this would be an inappropriate
waste. This symbol on the product, the product treated as household waste,
electrical electronic alert is for the delivery of waste collection facilities. The
destruction process of the product must be in accordance with local
environmental regulations. To destroy the product, use it again and again for
the detailed information for recycling can be obtained from the competent
departments.
29