Schaub Lorenz SLF S225W, Руководство пользователя

Страница: 10 / 44

EN - 9 -
Economy mode
Your freezer will consume minimum energy at -18°C
set value which is the most optimum storage condition.
When to use:
• When you want your freezer to operate economically.
How to use:
• Press the mode button until the Economy mode
LED lights up (3 times).
• If no button is pressed while the Economy mode LED is flashing, a beep sound will
be heard and the mode will be enabled.
• While the economy mode is active, the freezer operates at the special temperature
value set on the control circuit.
• While the economy mode is active, the letters “Ec” will be displayed.
While Economy mode is selected:
To cancel Economy mode and continue with previous set value:
Press the Mode button twice and wait for 5 seconds. Economy mode will be cancelled
and the appliance will operate at the previous set temperature.
To cancel SF mode and continue with new set value:
Press the Mode button once and wait for 5 seconds, then press the Set button until you
see the temperature that you want and wait for 5 seconds. Economy mode will be cancelled
and the appliance will operate at the new set temperature.
To cancel Economy mode and activate SF mode:
Press the Mode button three times and wait for 5 seconds. SF mode will be cancelled and
the appliance will operate in SF Mode.
Warnings about temperature adjustments
• If you have made any temperature adjustments, they will not be deleted if an energy
breakdown occurs.
• Do not start another adjustment before completing one adjustment.
• Temperature adjustments should be made according to the frequency of door openings
and the quantity of food kept inside the freezer.
• When you first switch on the appliance, allow it to operate for 24 hours continuously
to cool down to the correct temperature.
• During this initial 24 hour period do not open the door or place a lot of food inside the
appliance.
• If the appliance is switched off or unplugged, wait at least 5 minutes before plugging
the appliance in or restarting it in order not to damage the compressor.