Schaub Lorenz SL0014KO, Руководство по обслуживанию

Страница: 24 / 65

WHEN REPLACING EEPROM (MEMORY) IC
If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to
ensure correct data settings while making reference to TABLE 1.
NOTE: Initial Data setting will not be possible if clock has been set. To reset clock, either unplug AC cord and allow
at least 30 minutes before Power On or alternatively, discharge backup capacitor.
C4-1
--- --- --- --- 00 05 30 00 C0 8C
+0 +1 +2 +3 +4 +5 +6 +7 +8 +9
+A
+B +C +D +E +F INI
00 98 A3 00 05 63 65 66 47
3A 0F 4B 20 44 63 6B 65 64 EA
0F 00 11 F3 5F 0F 30 05 F3 60
A0 20 08 BF 10 00 00 00 00
00 ED C0 E1 81 02 0B0
0C0 27 1B 3B 32 17 19 1B
0D0 00 F5 77 50 68 5F
0E0 99 B2 9A 97 8C B2
0F0 C4 00 00 00 00 00 00
27 07 15 F3 00 23 42 20 11
00 07 04 00 40 20 20 00 00 40
25 27 29 2B 2D 2F 31 33 35 37
52 55 57 59 5B 5D 5F 61
100 03 F0 02 09 00 82 10
110 00 00 00 00 00 00
120 3A 3D 40 43 46 49
130 4F 63 65 67 69 6B 6D
4C
6F 71 73 76 79 7C 7F 82 85 88
9D A0 A5 AA AF B4 B9 BE C3 C8
140 8B 8E 91 94 97 9A
150 CD D2 D9 E1 F0 FF
3.
4.
5.
6.
7.
8.
The unit will now have the correct DATA for the new MEMORY IC.
Table 1
1.
2. Enter DATA SET mode by setting VOLUME to minimum.
While holding down VOLUME button on front cabinet, press key 6 on remote control for more than 2 seconds.
ADDRESS and DATA should appear as FIG 1.
ADDRESS is now selected and should "blink". Using the PLAY or STOP button on the remote, step through the
ADDRESS until required ADDRESS to be changed is reached.
Press ENTER to select DATA. When DATA is selected, it will "blink".
Again, step through the DATA using PLAY or STOP button until required DATA value has been selected.
Pressing ENTER will take you back to ADDRESS for further selection if necessary.
Repeat steps 3 to 6 until all data has been checked.
When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input.
Fig. 1
INIT 0B4 00
POWER ON 0000
PLAY/REC 0000
ADDRESS DATA