manualshive.com logo in svg

Schaub Lorenz SL0014KO, Руководство по обслуживанию

Поделиться
Скачать
Schaub Lorenz SL0014KO Скачать руководство пользователя страница 21

C2-1

SERVICE MODE LIST

This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily.

To enter SERVICE MODE, Unplug AC cord till lost actual clock time. Then press and hold Vol (-) button of main unit and
remocon key for more than 2 seconds.

The both pressing of set key and remote control key will not be possible if clock has been set. To reset clock, either unplug
AC cord and allow at least 30 minutes before Power On or alternatively, discharge backup capacitor.

Set Key Remocon Key Operations

VOL. (-) MIN 1

Initialization of the factory.
NOTE: Do not use this for the normal servicing.

VOL. (-) MIN 3

Adjust the PG SHIFTER automatically.
Refer to the "ELECTRICAL ADJUSTMENT" (PG SHIFTER).

VOL. (-) MIN 4

Adjust the PG SHIFTER manually.
Refer to the "ELECTRICAL ADJUSTMENT" (PG SHIFTER).

VOL. (-) MIN 2

Horizontal position adjustment of OSD.
NOTE: Also can be adjusted by using the Adjustment MENU.
Refer to the "ELECTRICAL ADJUSTMENT" (OSD HORIZONTAL).

POWER ON total hours and PLAY/REC total hours are displayed on the screen.
Refer to the "PREVENTIVE CHECKS AND SERVICE INTERVALS" (CONFIRMATION
OF HOURS USED ).

Can be checked of the INITIAL DATA of MEMORY IC.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".

VOL. (-) MIN 6

VOL. (-) MIN 9

Display of the Adjustment MENU on the screen.
Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display Adjustment).

VOL. (-) MIN 8

Writing of EEPROM initial data.
NOTE: Do not use this for the normal servicing.

VOL. (-) MIN 7 Releasing of PROTECTION PASSWORD.

Adjusting of the Tracking to the center position.
NOTE: Also can be adjusted by pressing the ATR button for more than 2 seconds
during PLAY.

Method Operations

Adjusting of the Tracking to the center position.
Refer to the "MECHANICAL ADJUSTMENT" (GUIDE ROLLER) and "ELECTRICAL
ADJUSTMENT" (PG SHIFTER).

Press the ATR button on the
remote control for more than
2 seconds during PLAY.

Make the short circuit between
the test point of SERVICE and
the GND.

The EOT/BOT/Reel sensor do not work at this moment.
Refer to the "PREPARATION FOR SERVICING"

VOL. (-) MIN 5

Содержание SL0014KO


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды