Scharfen ATM-3, Руководство по эксплуатации

Страница: 10 / 15

Page 10
3.7. Slicing end pieces

Pull the carriage backwards for loading the carriage (the machine
has to be in manual mode, lever in lower position).

Pull the end piece holder upwards.

Lay the food product against the back of the carriage.

Adjust the adjusting bar according to the size of the food product.

The end piece holder can be moved on the guiding bar according
to the size of the food product.

For this purpose loosen the fixing knob of the end piece holder
and move it to the required position.

Fix the screw of the end piece holder.

Push the end piece holder down and place it behind the food
product.

Adjust the thickness of the slices with the thickness knob.

Choose automatic or manual operation (see point 3.4.).
Manual operation

Switch on the machine at the green or blue main switch.

The food product is pushed against the blade by its own weight
(gravity). Move the carriage backward and forward.

After having finished the slicing procedure turn thickness knob to
zero.

Switch off the machine.
Automatic operation

Switch on the machine at the green or blue main switch.

Choose electronic functions as described in chapter 3.5. (only for
model ATM-3 E or ATM-3 ES)

Push red button automatic start – stop in order to start the automatic
movement (only for model ATM-3 E or ATM-3 ES)

The food product is pushed against the blade by its own weight
(gravity).

The carriage is moved automatically

After having finished the slicing procedure turn thickness knob to zero.

Switch off the machine.
Attention! Never try to load the carriage while it is moving automatically. Always switch
off the machine first, otherwise there is a risk to get injured!!
4. Cleaning
Before initial operation and after a longer period of standstill the machine has to be cleaned carefully.
With permanent use of the machine you have to clean it at least one time per day or if necessary also a
few times per day. For cleaning proceed as follows:
Risk of getting hurt!
Be careful when cleaning the machine. Especially in the area of the knife there is a risk
of injury. Always work with concentration, do not let distract yourself from your work.
4.1. How to proceed with cleaning
Switch off the machine.
Adjust manual movement of the carriage (see 3.4).
Pull off the plug.
Close the thickness plate completely by turning the thickness knob to the left.