Page 23
5.6
Saving several readings (a measurement series) at the same time
To do so:
The device has to be in the Data Log menu
(see
).
1. Take several measurements at different points
of the same haystack (see
2. After each measurement, press
to save the
reading.
»
The display will appear as shown in figure
. The
marked number shows the number of readings
that have already been saved.
3. Press
to enter a name for the saved measure-
ment series and to finish the measuring process.
»
The display will now appear as shown in figure
.
4. The data you have inputted can be overwritten at any time.
5.
Inputting letters:
Press and hold
to quickly scroll to the
required letter and either press it for 3 seconds or
press
to confirm the selected letter (figure
6.
Inputting numbers:
Press and hold
to quickly scroll to the
required number and either press it for 3 seconds or press
to confirm the
selected number.
7.
Moving forward/back:
Press
to switch to another input level. Press
or
to move forward or
back.
8. Confirm your entry by pressing
.
»
The data you entered has been saved.
»
The device automatically determines the average moisture content of the saved
measuring values.
32
33
34