Schäfter+Kirchhoff SK6288GKOC-L Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 32

Schäfter+Kirchhoff SK6288GKOC-L Скачать руководство пользователя страница 15

Line Scan Camera SK6288GKOC-L Manual (06.2015) • shar

ed_CameraContr

ol(2)_Adjustments-1.indd (06.2015)

15

3 Camera Control and Performing a Scan

SK6288GKOC-L

Instruction Manual

(06.2015)

© 2015

Schäfter + Kirchhoff GmbH

•

Hamburg

Sensor Alignment

If you are operating with a linear illumination source, check the alignment of the illumination source and the sensor

prior to a shading correction, as rotating the line sensor results in asymmetric vignetting.

Sensor and optics rotated in apposition

Sensor and optics aligned

Gain/Offset Control Dialog

Cameras are shipped prealigned with gain/offset factory settings. Open the "Gain/Offset Control" dialog [Shift+F4]

to re-adjust or customize settings.

Gain/Offset Control dialog

The gain/offset dialog contains up to 6 sliders for altering gain and offset. The number of active sliders depends on
the individual number of adjustable gain/offset channels of the camera.
The 'Camera Control' frame on the right is used for commands and advanced software functions. (



4.1 Camera

Control by Commands, p. 22

)

2. Adjust channel 1 gain

and minimize difference

between channels

using

Gain slider

1. Adjust channel 1 zero

level and minimize diffe

-

rence between channels

using

Offset slider

Offset and gain adjustment for more than one gain/offset channel

Adjustment principle

1. Offset

To adjust the zero baseline of the video signal, totally

block the incident light and enter "00" (volts) for channel 1.

For a two- or multi-channel sensor minimize any diffe-
rences between the channels by adjusting the other
Offset sliders.

A slight signal noise should be visible in the zero baseline.

2. Gain

Illuminate the sensor with a slight overexposure in order

to identify the maximum clipping. Use the Gain slider "1"

to adjust the maximum output voltage.

For a two- or multi-channel sensor minimize any diffe-
rences between the channels by adjusting the other Gain
sliders.
For the full 8-bit resolution of the camera, the maximum

output voltage is set to 255 and for 12-bit is set to 4095.

«
...
13
14
15
16
17
...
»

Содержание SK6288GKOC-L

































Отзывы:

Нет отзывов