Schaerer Siena-2, Руководство пользователя

Страница: 43 / 198

BASL - 02 - V01 Page 41
User manual
UK
Note:
If you are going to be away for a lengthy period such as on
holiday, we recommend that you run the rinse programme before
you switch off the appliance.
5.1 Daily and weekly cleaning
The fresh water tank (7), the
drip tray (9), the cup grill (10)
and the grounds container (11)
must be cleaned regularly.
Use hot water for this and, if
necessary, a non-abrasive de-
tergent.
Attention:
Do not clean in the dish-
washer!
5.2 Drip tray cleaning
If the level display sticks out of
the drip tray, it must be emp-
tied due to a danger of over-
flow. Carefully pull the drip tray
out from the guide and clean it
with hot water and with a non-
abrasive cleaning agent, if ne-
cessary.
5.3 Beverage output cleaning
The beverage outlet is remov-
able to permit cleaning. Use
hot water with, if necessary, a
non-abrasive cleaning agent.
For normal use, we recom-
mend cleaning this component
at monthly intervals.
5.4 Cleaning the grinder
Normally the grinder cleans itself. It is sufficient merely to re-
move larger grinding residues from the beans container with the
supplied brush.
Attention:
In no circumstances put water into the beans container, this
damages the grinding discs.
Tiny stones occasionally get mixed up with even the finest
blends of coffee beans. To prevent them damaging the blades,
the appliance has an integral electronic stone detection function
which cuts out the motor to prevent damage to the grinder. If a
stone gets stuck, the mill stops and the malfunction is displayed
via the control display and the message "Mill block" is dis-
played. Follow these steps to clear the blockage:
5.4.1 Unplug the appliance
at the mains socket.
5.4.2 Remove the remaining
beans from the beans con-
tainer
5.4.3 Using the special mul-
tifunctional tool, grasp the
square end of the grinding
discs spindle and slowly turn
the discs in a clockwise direc-
tion until the stone or foreign
body is released and can be
removed. It is easiest to re-
move the foreign body with a
vacuum cleaner.
5.4.4 Remove the multifunc-
tion adjustment tool from the
beans container and refill with
fresh coffee beans. Then close
the container lid and reinsert
the mains plug into the mains
socket.
5.5 Rinsing the brewing unit and the bever-
age outlet system
5.5.1 Automatic rinsing
The brewing unit and the coffee system are automatically rinsed
when switching on or switching off the device (the automatic
switch-on and switch-off rinsing can be activated and/or deacti-
vated by a service technician or a service office independently of
each other.
5.5.2 Manual rinsing
(For machine with Cappuc-
cino, also see section
5.6
Page 42 )
You always have the possibil-
ity to rinse the brewing unit
and the coffee outlet system
with the
button (Rins-
ing/Cleaning). This takes
about 1 minute and is dis-
played by the display message
"Rinsing". The machine is
again ready for use as soon as
the message "Ready" ap-
pears.
To start rinsing, press
1 x
briefly on the button (Rin-
sing / Cleaning).
900'0
49.0
01
900'0
06.0
02
900'0
51.0
01
900'0
52.0
01
900
'1
25.0
0