Schaerer Milkfoamer, Руководство пользователя

Страница: 17 / 18

User manual
BAMF - 02.00 - V05 Page 15
6. Errors
6.1 Possible faults
- Unsatisfactory frothing
The resistance in the spout is missing.
The spout is dirty.
The air infeed valve has stopped working.
- No milk or foam delivered
The suction tube is blocked.
The walls of the suction tube are stuck together.
- Milk slow to heat
Less than 0.5 dl water is in the hot-water bath.There is not the required 0.5 dl water (1.5 dl in the case
of the 10 liter Milk Foamer) between the milk tray and the bain Marie.
- No coffee or milk delivered
The Milk Foamer spout assembly has been removed or incorrectly replaced - the display indicates
`Foamer head not in place’.
- The milk is droping at the spout
The flap valve below the cover is filthy, incorrectly mounted or missing.
Attention:
If you cannot remedy the fault yourself with the help of the above guidance, you should call in an
M. Schaerer AG authorised service technician.