Schaeffler OPTIME, Руководство пользователя

Страница: 12 / 90

10 BA 68 Schaeffler Technologies
Schaeffler OPTIME
Safety regulations
All safety specifications are described in the following sections.
Safety during installation Read this user manual before installing the system. Make sure you
are certain that the product is suitable without restrictions for
the relevant applications.
Before installing the components, check for any external damage.
If damage or some other defect is found, the system must not be
commissioned.
Any interventions in and modifications to the system, or the addition
or removal of components not designed to be added or removed,
are impermissible, can endanger occupational safety and may
render any warranty claim null and void.
The device may only be installed by a trained electrician who obser-
ves the national and international regulations covering the
installation of electro-technical equipment.
Handling the lithium batteries
in the sensors
The sensors contain non-replaceable lithium thionyl chloride batter-
ies, which are not dangerous provided they remain in the sensor
housing. Never expose the batteries to excessive mechanical,
thermal or electrical loads, as this would activate the safety valves
and the battery container could rupture. Do not open the sensor.
Avoid temperatures of more than +100 °C. Dispose of the sensor
in accordance with the statutory provisions.
The incorrect handling of sensors may result in leaks or the emission
of evaporated electrolyte that can cause a fire or an explosion and
lead to serious injuries or death.
Sensors must be deactivated during transport and storage.
Keep away from children Gateway and sensors are not toys and must be kept out of the reach
of children. The system contains small parts. Children must not be
allowed to play with system components.
Danger of burns due to hot surfaces The outer surface of a machine can reach high temperatures that can
cause injuries in the event of direct contact. Before performing
installation work switch off the machine and allow it to cool down.
If these instructions are not followed serious injuries may result.