Schaeffler HEATER Series, Руководство пользователя

Страница: 17 / 30

Schaeffler Technologies
17
Large workpieces can be thermally insulated by wrapping them
in insulating material, such as a welding blanket. This ensures
that the heat stays in the workpiece and does not dissipate.
Horizontal, with workpiece around the pole
■
Place the induction ledge with the bearing on the poles.
Make sure that the ground side is positioned straight on
the poles.
■
Always choose an induction ledge that fills the bore of the
bearing as much as possible. You can even use 2 ledges at the
same time. This promotes optimal, fast and even heating.
■
Make sure that the bare-metal sides are sufficiently coated
with lubricant to ensure optimal contact and avoid vibration.
7.1 Heating a hanging
workpiece