Schaeffler HEATER Series, Руководство пользователя

Страница: 15 / 30

Schaeffler Technologies
15
■
The magnetic temperature sensor must always be used
when heating in “temperature mode”.
■
The sensor can be used as a tool for temperature control
whilst heating in “time mode”.
■
The sensor is suitable for a maximum temperature of 240ºC
(464°F).
■
In the event of temperatures exceeding 240ºC (464°F),
the connection between the magnet and the sensor is
interrupted. The heater switches off automatically when the
sensor does not detect a temperature increase.
■
Special clamp sensors are available for non-magnetic
workpieces.
■
Make sure that the sensor and workpiece surfaces are clean.
■
Always place the sensor on a flat area as close as possible
to the bore. Connect the sensor by inserting the plug into
the socket (in the casing). Make sure that the – and + of the
plug correspond to that of the socket.
6. The magnetic temperature sensor
Careful!
Handle the sensor with care! It is a vulnerable part of the
heater. After use, place the sensor on the side of a
vertical pole.