– 4 –
– PB –
treadle
support
barrel nut
C
D
right inside leg
FIGURE 4: INSIDE LEG
hold the barrel nut in position. Secure the
treadle support firmly.
15.
Attach the height extender blocks
to the inside legs using 1/4-20 x 1-1/4"
Phillips truss head machine screws,
inserted from the inside of the leg through
the bottom hole (hole [C], Figure 4), then
through the hole with the threaded insert
on the height extender block (3rd hole
from the bottom). Secure firmly.
16.
Finish attaching the height extender
blocks by inserting a 1/4-20 x 1-3/4"
Phillips truss head machine screw from
the inner side of the leg through the top
hole of the leg (Figure 4, hole [D]) and
the top hole of the height extender block.
Secure the screw with a 1/4" washer and
1/4-20 lock nut. Repeat for the other inside
leg and height extender block.
17.
Install extended tie-up cords and
extended treadle aid tie-ups. Your height-
extended Wolf loom is now ready to weave
on.
•
hole for
machine screw
metal
pin
FIGURE 6: TREADLE SUPPORT
FIGURE 5: TREADLE ASSEMBLY
left inside leg
right inside leg
PS
WS
WS
WS
WS
WS
WS
PS
TB
TB
TB
OT
OT
IT
IT
IT
IT
IT
IT
IT
IT
