– 4 –
■
After all of the cords are attached,
install the apron bars. First make a
loop in the cord (
Photo 6d
) and then
put the loop through the last hole in
the cord. (
Photo 6e
) Slide the apron
rod into the loop and pull tight. (
Photo
6f
) Continue with the rest of the
cords, making sure to loop all of the
cords in the same way so that they
end up the same length.
6f
6e
6c
6d
See our video:
How To Install Apron Cords
at
schachtspindle.com/product-support/
4.
Attach the apron cords.
■
Insert one end of each cord into
each hole in the warp and cloth
beams. Use a straightened paper clip
to push the cords through. (
Photo 6a
)
■
Place the other end of the cord
through the last hole in the cord and pull
it tight around the beam. (
Photos 6b–c
)
6b
4
5
6a