-
12
-
www.SCEPTRE.com
SCEPTRE E195 HDTV User Manual
Rear View Connections
1.
DC
– This connection connects to an AC adapter for powering the TV.
2.
USB
–
USB connects to USB flash drives for playing music and picture. The
USB port is also used for updating the TV’s firmware.
3.
HDMI1
– HDMI connects to devices that use HDMI cable, such as Blu-ray or
HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video
.
4.
HDM2
– HDMI connects to devices that use HDMI cable, such as Blu-ray or
HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video
.
5.
VGA
- This connection port connects to a PC for video using VGA cable. Be
sure to connect your audio cable to the VGA Stereo input if you want sound
out of VGA video source.
6.
Audio In
- This connection port is for people who want to provide audio to the
TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack
audio cable.
7.
SPDIF
- This connection port is used for sending out digital audio signals to
digital surround sound receivers. The orange (COAX SPDIF OUT) connector
sends out either bit-stream or PCM digital sound signal to a home theater
receiver with digital coax input.
8.
HEADPHONE
– This connection is for headphones to be attached to the TV.
9.
YPbPr
– This connection port is for DVD players or satellite / cable set-top
