6
PART#-31600035-LIT-SWD1001-MANUAL-REV.A
Cartridge Installation
1. Locate the scent cartridge that was shipped with the system and remove the cartridge
from the shipping container.
2. Remove the shrink-wrapped plastic from the cartridge.
3. Plug the scent cartridge cord into the connection on the inside bottom front of the
ScentWave™.
FIG. G
4. Insert the scent cartridge completely into the ScentWave™ by lining up the notches on
the cartridge with the openings on the system. Lock by turning clockwise.
FIG. H
NOTE: To help maintain the life of the ScentWave™, when changing your cartridge, always
make sure to clean the back of your system to remove any dust that has accumulated on the
rear grille.
FIG. G
FIG. H
