5
PART#-31600035-LIT-SWD1001-MANUAL-REV.A
Wall Mounting Arm Installation
1. Install preparation:
FIG. D
•
Remove the mounting ring from the base by loosening the retainer ring on the
universal mount arm.
•
Hold the base in the desired location on the wall, mark three screw holes with
pencil.
•
Use your screwdriver to drive the provided white plastic anchors into the wall.
2. Attach the Mounting Arm to the ScentWave™:
FIG. E
•
Attach the mounting plate to the pivot end of the wall mounting bracket through
the center hole using the provided lock nut and screw.
•
Attach the mounting plate assembly to the bottom of the ScentWave™ using the
provided plate screws and pilot holes.
3. Attach the assembly to the wall:
FIG. F
•
Hold the mounting arm base over the anchors and use your screwdriver to drive
the screws into the anchors
•
Attach the wall mounting arm to the base using the retainer ring on the arm.
•
Adjust the pivot end as necessary for a correct angle and secure fit.
4. Power the ScentWave™
•
Plug the power cord into both the wall outlet and ScentWave™.
•
Extra power cord can should be secured out of sight.
Pivot Adjustment
FIG. D
FIG. E
FIG. F
