ISD8001: Industrial ScentDirect
Diffusion System
Wall Mount Instructions
ISD (Industrial Direct Diffusion System)
Congratulations on the purchase of your ISD fragrance delivery system. Please take a moment
to read the provided instructions and familiarize yourself with the operation of the system.
Understanding how the system works is vital in ensuring ideal scent delivery.
The ISD scent diffusion system is designed to deliver a dry vapor fragrance directly into the air
in any enclosed space. This unit uses air at low pressures to atomize liquid fragrance into a
dry vapor. The atomization occurs inside the machine and the scent is delivered from the unit
with a fan. The ISD is able to adjust the fan speed and the pump pressure to cover a wide
range of applications.
INSTALLATION INSTRUCTIONS
DETERMINE MOUNTING LOCATION
Always review the air flow characteristics of the property before starting an installation.
Identify the location to be scented and locate a surface nearby to mount the machine. The
unit should be mounted so that the output crosses the location to be scented.
Be sure to mount the ISD out of the reach of children. The system can be mounted anywhere
from ground level to 12 feet high.
A good rule of thumb is to mount it above or below nose
level and allow fragrance to disperse into the space.
System must be upright and level to function correctly. Please use in a dry
environment for best results.
Wall Mount Installation instructions
The articulating wall mount MUST BE installed directly over wall studs when used on a
finished interior wall. The wall mount bracket is installed on the wall first and then the
ISD8001 is hung and secured. The mount is supplied with 6mm dia coarse thread screws that
can be used in wood framing or (with plastic anchors ) concrete or masonry walls. Please
refer to the instructions provided with the Mount itself ( pages 1-5 ) for attaching the mount
to these materials. Always use a studfinder to determine the center of a wall stud before
finalizing the placement of the wall mount. Whenever the mount is to be installed into metal
framed walls with thin gauge sheet metal studs the special ¼-20 screws and special
snaptoggle anchors must be used according to the following directions. The snaptoggle
anchors are also to be used when installing the mount onto thin walled cinderblock wall.
