SCE ENVIRO-THERM SCE-HE18W120V Скачать руководство пользователя

Страница: 3 / 17

SAGINAW CONTROL & ENGINEERING • A/C USER MANUAL

back to top

3. Safety Instructions

Upon delivery the unit is already meeting current technical standards, therefore it can be safely taken into operation. Only

trained specialists are allowed to work on the unit. Unauthorized personnel must be prohibited from working on the unit.

Operating personnel must inform their superiors immediately if any malfunction of the unit becomes apparent.
Please note that before starting to work on or with the unit, a procedure must be carried out inside the cabinet on which the

unit is to be mounted.
Before commencing work inside the cabinet, the control cabinet manufacturer’s instruction must be read with regards to:

• Safety instructions

• Instructions on taking the cabinet out of operation

• Instructions on the prevention of unauthorized cabinet reconnection

The electric equipment meets the valid safety regulations. One can find dangerous voltage (above 50V AC or above 100V

DC):

• Behind the control cabinet doors

• On the power supply in the unit housing

The units have to be fused according to the type plate and the wiring diagram. Switch the unit

off

immediately if the electric

power supply is interrupted.

Danger Through Incorrect Work on the Unit

Only specialized personnel are allowed to maintain and clean the unit. Regular maintenance

and cleaning must be kept in order to ensure that the unit remains in perfect working condition

and has a long working life.

Danger from Electric Voltage

Only specialized personnel are allowed to maintain and clean the unit. The personnel must

ensure that for the duration of the maintenance and cleaning, the unit is disconnected from

the electrical supply.

Attention

Damage to the unit through the use of inappropriate cleaning materials. Please do not use

aggressive cleaning material.

Instruction

Damage to the environment through unauthorized disposal. All spare parts and associated

material must be disposed of according to the environmental laws.

All manuals and user guides at all-guides.com

Содержание ENVIRO-THERM SCE-HE18W120V


















Результаты поиска

Содержание ENVIRO-THERM SCE-HE18W120V

Отзывы:

Похожие инструкции для ENVIRO-THERM SCE-HE18W120V

Бренды по названию

Популярные бренды

SCE ENVIRO-THERM SCE-HE18W120V, Руководство пользователя

Результаты поиска

Содержание ENVIRO-THERM SCE-HE18W120V

Отзывы:

Похожие инструкции для ENVIRO-THERM SCE-HE18W120V

Бренды по названию

Популярные бренды