IM023
3
GB
INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Please read all instruction manuals before use and save it for future references.
For home use only. Do not use for industrial or commercial purposes.
Oiling of inner mechanism is not needed.
Do not shock the scale with sudden loading or striking.
Do not overload the scale.
Never try to repair this appliance by yourself. In case of failure, contact the nearest seller.
If the product has been exposed to temperatures below 0
˚C for some time it should be kept at room
temperature for at least 2 hours before turning it on.
The manufacturer reserves the right to introduce minor changes into the product design without prior
notice, unless such changes influence significantly the product safety, performance, and functions.
Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents
in the following format XX.XXXX where first two figures XX is the month of production, and following
four figures XXXX is the year of production.
OPERATING INSTRUCTIONS
START TO USE
Scales are intended for weighing products and ingredients during cooking.
Open the battery compartment on the back side of the scale. Remove the safety film. The scale is
ready for operation.
Place the scale onto a flat hard horizontal surface. Do not place the scale on soft surfaces.
Press «ON/ТARE» button to turn on the scale.
Wait for a few seconds for the display to show a «0».
Place the product onto the scale; the scale will indicate the weight of the product.
On the back side of the scale, there is a unit of measure switch. Use it to set the units of measure:
grams (g) or kilograms (kg) ,pounds (lb) ounces (oz), milliliters water (ml water), milliliters milk (ml milk)
To weigh the products successively without removing them from the scale, press the
«ON/ТARE» button to set the scale to a zero before adding the next product.
AUTOMATIC SWITCHING OFF
If the display shows «0» or the same weight reading for 3 minutes, the scale will automatically turn off.
OVERLOAD INDICATOR
When the scale is overloaded, the
display shows «EEEE».
BATTERY REPLACING
Replace the battery when the display shows «Lo».
MAINTENANCE AND CARE
Wipe the scale with a soft cloth and cleaner, and then dry it.
Do not use any organic solvents, aggressive chemicals and abrasives.
STORAGE
Complete all requirements of chapter MAINTENANCE AND CARE.
Do not put anything on scale when not in use.
Keep the scale in a dry cool place.
BATTERRIES USAGE RULES
Battery contains harmful substances for human body. Keep the wrapping materials out of reach of
children (choking hazard). The person, who swallowed a battery, should immediately consult a doctor.
Change the batteries regularly. Change all batteries at once using the elements of the same type.
It is forbidden to recharge or restore batteries in other manner, disassemble them, or throw into fire or
hot-wire.
The battery must be inserted in the correct polarity.
Discharged battery can be a reason of scale breakdown. Remove the batteries compartment in case of
long out-of-action time.
Do not throw the batteries into fire! Highly explosive!
Do not short-circuit the power clamps.
The symbol on the unit, packing materials and/or documentations means used electrical and
electronic units should not be toss in the garbage with ordinary household garbage. These units should
be pass to special receiving point.
The symbol on the unit, packing materials and/or documentations means the battery used in this
product not be toss in the garbage with ordinary household garbage.
