Scarlett SC-JE50S41, Инструкция по эксплуатации

Страница: 4 / 27

IM019
www.scarlett.ru SC-JE50S41 4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS

Please read these operating instructions carefully before connecting your kettle to the power supply, in
order to avoid damage due to incorrect use.

Before the first switching on check that the voltage indicated on the rating label corresponds to the mains
voltage in your house.

Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.

Do not use outdoors.

The appliance is intended for use only in domestic aims. The unit is not intended for industrial and
commercial use, and also for use in:

kitchen area for the stuff of shops, offices and the other industrial places

farm houses

hotels, motels, rest homes and other similar places by residents.

Do not disassemble the juice extractor when it is plugged to the power supply. Always unplug the
appliance from the power supply before cleaning and when not in use.

To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has
happened, unplug it immediately and check in a service center.

The appliance is not intended for use for physically, sensory or mental disabled person (including children)
or for person with lack of life experience or knowledge, if only they are under supervision or have been
instructed about the use of the unit by responsible person.

Children must be under control in order not to be allowed to play with the appliance.

Do not leave the appliance switched on when not in use.

Do not use other attachments than those supplied.

In case of power cord is damaged, its replacement should be done by the manufacture or service
department or the other high-skill person to avoid any danger.

Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning
appliance in the nearest service center only.

Keep the cord away from sharp edges and hot surfaces.

Do not pull, twist, or wrap the power cord around the appliance.

Do not place the appliance near gas or electric oven or store at heated surface.

Avoid contacting with moving parts.

Warning! Do not use the appliance if the rotating strainer is damaged.

Always make sure the safety lock is fastened correctly before switching on. The unit is designed to shut off
automatically if locks are not fastened securely in place.

Do not push products into the appliance by fingers while it is in operation. If food becomes lodged in feeder
tube, u
se pusher to push it down. If this doesn’t work, turn the motor off, unplug unit, and then disassemble
juice extractor to remove remaining food.

Do not run juice extractor continuously for longer than 7 minute . Turn off switch and let it rest for at
least 7 minute to cool down the motor, otherwise the motor may be damaged.

Every time make sure that the appliance is unplugged and all moving parts with motor are stopped
completely before disassembling and cleaning.

Be sure to switch off the unit after each use.

Do not overload appliance with products.

It is not recommended to keep the non-loaded unit more than 1 minute.
 If the product has been exposed to temperatures below 0ºC for some time it should be kept at room
temperature for at least 2 hours before turning it on.

The manufacturer reserves the right to introduce minor changes into the product design without prior notice,
unless such changes influence significantly the product safety, performance, and functions.

Production date mentioned on the unit and/or on the packing materials and documentations.
PREPARATION FOR USE

The juice extractor is used for preparation of fresh juice of vegetables, fruits, greenery, berries and fruit
sorbet as well.

Unpack the unit and check the unit and accessories for damage.

Thoroughly wash and dry all parts that come into contact with food.

Wipe the outside surface of the housing with slightly damp cloth.
ASSEMBLY/DISASSEMBLY
DISASSEMBLY:

Disconnect the appliance from mains.

Remove the neck rotating it counter-clockwise towards the OPEN position on the unit.

Remove the screw rotating it counter-clockwise.

Remove the filter.

After that remove the plastic housing part rotating it towards the OPEN position on the unit.
ASSEMBLY:

Before assembly make sure that the appliance is disconnected from mains and the motor is not running.