IM010
www.scarlett.ru
SC-1133S
6
WATER TANK FILLING
•
Unplug the iron before filling the water tank.
•
Hold the steam iron in horizontal position.
•
Slowly pour water through the water inlet.
•
Do not fill higher than mark on the water tank, in order to avoid water spilling.
•
The opening which is used for pouring water should be closed when the iron is in use.
•
Always unplug the iron from the power socket when refilling the water reservoir.
NOTE:
Your steam iron is designed to use tap water. However, if the water is very hard, it is
advisable to use distilled water.
NOTE:
Do not use chemically de-limed or perfumed water.
NOTE:
If you have too hard water,it is advisable to use only distilled or demineralized water.
•
The water tank should be emptied after each use.
SPRAYING
•
As long as there is enough water in the water tank, you may use the spray button at any
temperature setting during steam or dry ironing.
•
Press the spray button several times to activate the pump while you are ironing.
STEAM IRONING
•
With the unit unplugged, fill the steam iron with water.
•
Stand the steam iron on its heel rest in an upright position on an iron-safe surface and plug in.
•
Set the temperature control dial to the “••“ or “•••” position.
•
When the indicator light is off, the steam iron has reached desired temperature.
•
Set the variable steam control to the desired position
.
•
When finished, turn the temperature dial counterclockwise to the minimum position and unplug
the appliance from the power supply.
CAUTION:
Avoid coming in contact with ejected steam.
DRY IRONING
•
The steam iron can be used on the dry setting with or without water in the water tank, however
it is best to avoid having the water tank full while dry ironing.
•
Turn the variable steam control to the minimum position
.
CAUTION:
If the steam iron has been used for a long time, it is hot and there is no water. Do
not refill it with water until the steam iron cools down.
BURST OF STEAM
•
The burst of steam feature provides additional steam for removing stubborn wrinkles.
•
Turn the temperature control dial to the “••” or “•••” position.
•
Turn the variable steam control to the maximum position
.
•
Press the powerful steam button to release the burst of steam.
NOTE:
To prevent water leakage from the soleplate, do not keep the powerful steam button
pressed for more than 5 seconds.
NOTE:
For the best steam quality, do not use more than three successive bursts each time,
because the iron will cool.
VERTICAL STEAM
•
Ensure that there is enough water in the water tank.
•
Stand the steam iron on its heel rest on an iron-safe surface and plug it.
•
Set the temperature control dial and variable steam control to their maximum positions.
•
Hold the iron vertically and press the steam burst button, an intense steam will be ejected from
the soleplate.
WHEN YOU FINISHED IRONING
•
Set the temperature dial to the minimum position.
•
Remove the mains plug from the wall socket.
CARE AND CLEANING
•
Before cleaning the steam iron ensure it is unplugged from the power supply and has
completely cooled down.
•
Do not use abrasive cleaners.
SELF-CLEANING
•
Fill water reservoir up to the maximum level and then close it.
•
Set the temperature control to its maximum position.
